Extreme Networks SSA-T8028-0652 Gigabit Standalone Managed Switch

Technical SpecificationsModel:SSA-T8028-0652 Brand:Extreme Networks Product Type:1U rackmount standalone Layer2/Layer3 switch Ports:48 × 10/100/1000BASE-T RJ45 copper ports,4 × 10G SFP+ uplink ports Switching capacity:184 Gbps Forwarding rate:137 Mpps MAC address table:32000 entries VLAN:4094 VLAN IDs Management:COM serial console port, Micro-USB debug port, out-of-band management, SNMP, CLI OS:EOS (Enterasys Operating System) Redundancy:Supports dual hot-swappable AC power supplies Operating temperature:0℃ ~ +40℃ Storage temperature:-40℃ ~ +70℃ Relative humidity:10%~90%, non-condensing Weight:6.7 kg

System compatibilitySSA-T8028-0652 belongs to Extreme Networks S-Series S180 SSA (Stand Alone) family, formerly Enterasys. Compatible with Extreme validated 10G SFP+ transceivers including SR, LR, ER and DAC twinax cables. It is a fixed-port standalone unit, not a modular chassis blade. Widely used for enterprise campus access and aggregation network spare replacement.

FunctionSSA-T8028-0652 is a high-performance Layer3 managed gigabit switch. It supports static and dynamic routing, VLAN segmentation, STP/RSTP/MSTP, LACP link aggregation, ACL, QoS, IPv4/IPv6 multicast and 802.1X authentication. It monitors port link state, SFP+ DDM optical parameters, chassis temperature, fan speed and power supply health. Used for resilient stacked or standalone gigabit access and aggregation networks.

InstallationMount the switch on standard 19-inch 1U rack. Install dual AC power supplies for redundancy. Insert SFP+ transceivers and fiber/DAC cables for uplink. Connect Cat5e/Cat6 cables to RJ45 access ports. Connect COM serial console port for EOS configuration. Verify boot sequence and port link status before putting into production.

Interface48×1G RJ45 copper ports,4×10G SFP+ uplink slots,DB9 COM serial console port,Micro-USB debug port,system status LEDs,AC power inlets,ground terminal,rack mounting ears for Extreme Networks SSA-T8028-0652.

FeatureOriginal Extreme Networks S-Series S180 SSA 1U rackmount 48-port gigabit Layer3 standalone switch,10G high-speed uplink,dual redundant hot-swappable power supply,transceiver DDM optical monitoring,EOS operating system,built-in self-diagnostic function. This spare supports enterprise campus aggregation and high-density wired access network deployment.

DiagnosticSwitch fails to boot: check AC power input and power supply seating. Port link down: check Cat5e/Cat6 cable, SFP+ transceiver and port admin status. Transceiver no DDM data: confirm Extreme validated SFP+ module. Optical low power alarm: inspect dirty fiber end or damaged cable. Over-temperature alarm: inspect fan operation and rack ventilation. Redundancy alarm: verify both power supplies are powered and detected.

Product BriefSSA-T8028-0652 is Extreme Networks S-Series S180 SSA 1U rackmount 48-port gigabit Layer3 standalone switch with 4×10G SFP+ uplink and dual redundant power supplies, classic spare part for enterprise aggregation and access network overhaul.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.