Extreme Networks SK8008-1224-F8 10G SFP+ Fabric I/O Line Card

Technical SpecificationsModel:SK8008-1224-F8 Brand:Extreme Networks Product Type:Hot-swappable S180 fabric I/O line card Compatible chassis:S-Series S8, S6, S4 modular chassis Ports:24 × 10G SFP+ ports Switching architecture:Distributed fabric forwarding Minimum firmware:EOS 08.11.01.0014 Supported features:Layer2/Layer3, ACL, QoS, IPv4/IPv6, multicast Operating temperature:0℃ ~ +40℃ Storage temperature:-40℃ ~ +70℃ Relative humidity:10%~90%, non-condensing Weight:1.7 kg

System compatibilitySK8008-1224-F8 belongs to Extreme Networks S-Series S180 class fabric line card. It is designed for S8, S6 and S4 S-series chassis. Compatible with Extreme validated 10G SFP+ transceivers including SR, LR, ER and DAC twinax cables. Widely used for legacy data center and enterprise core aggregation network spare replacement.

FunctionSK8008-1224-F8 is a high-density 10G fabric line card for S-series modular switches. It provides 24×10G SFP+ ports for high-speed uplink and server connectivity. It supports wire-speed Layer2 switching, Layer3 routing, access control lists, quality of service, IPv4/IPv6 multicast and security policies. It monitors port link status, SFP+ DDM optical parameters, module temperature and power consumption, and sends fault alarms to the chassis supervisor. Used for high-density 10G server and aggregation access in data center.

InstallationHot-swappable replacement. Insert SK8008-1224-F8 into empty line card slot of S8/S6/S4 chassis. Tighten captive screws. Insert SFP+ transceivers and fiber/DAC cables. Verify module online and port status on EOS before putting into production.

Interface24×10G SFP+ ports, module status LEDs, reset button, ejector latches for Extreme Networks SK8008-1224-F8.

FeatureOriginal Extreme Networks S-Series S180 hot-swappable 24-port 10G SFP+ fabric line card, distributed high-performance fabric architecture, DDM optical monitoring, wire-speed forwarding, EOS operating system, built-in self-diagnostic function. This spare supports legacy data center high-density 10G server and aggregation network deployment.

DiagnosticModule not detected: check card seating, captive screws and backplane contact. Port link down: verify SFP+ transceiver, fiber/DAC cable type and port admin status. Transceiver no DDM data: confirm Extreme validated SFP+ module. Optical power alarm: inspect dirty fiber end or damaged cable. Over-temperature alarm: check chassis fan operation and airflow.

Product BriefSK8008-1224-F8 is Extreme Networks S-Series S180 hot-swappable 24-port 10G SFP+ fabric line card for S8/S6/S4 modular chassis, classic spare part for data center core and aggregation high-speed network overhaul.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.