Extreme Networks C5K17524 C5 Series Gigabit Stackable Switch

Technical SpecificationsModel:C5K17524 Brand:Extreme Networks Product Type:Legacy Stackable Layer3 Gigabit Access Switch Ports:24 × SFP slots for 1G transceivers, 2 × shared SFP+ uplink slots for 10G Switching capacity:88 Gbps Forwarding rate:65.5 Mpps MAC address table:32000 entries VLAN:4093 VLAN IDs Redundancy:Supports external RPS redundant power supply Operating temperature:0℃ ~ +40℃ Storage temperature:-40℃ ~ +70℃ Relative humidity:10%~90%, non-condensing Weight:3.4 kg

System compatibilityC5K17524 belongs to Extreme Networks C5 stackable switch family. It can stack with other C5 series switches. Compatible with Extreme validated 1G SFP and 10G SFP+ optical transceivers and fiber patch cords. Widely used for legacy enterprise building fiber access spare replacement.

FunctionC5K17524 is a high-performance L3 managed fiber access switch. It supports static routing, VLAN, STP, RSTP, MSTP, ACL, QoS, IPv4/IPv6 dual stack and SNMP monitoring. It monitors port link status, transceiver DDM data, internal temperature and power supply health. Used to replace faulty fiber access switches for enterprise wiring closet overhaul.

InstallationMount the switch into 19-inch rack. Connect AC power cord, external RPS can be connected for redundancy. Insert SFP/SFP+ transceivers and fiber patch cables. Connect console port for initial configuration. Verify boot and port link status before putting into production.

Interface24×1G SFP ports,2×shared SFP+ uplink slots,serial console port,status LEDs,AC power inlet,rack mounting ears for Extreme Networks C5K17524.

FeatureOriginal Extreme Networks C5 series 24-port gigabit fiber stackable L3 switch, wire-speed forwarding, dual IPv4/IPv6 management, transceiver DDM monitoring, external redundant power option, built-in self-diagnostic function. This spare supports multi-service voice/wireless/data converged enterprise fiber access deployment.

DiagnosticSwitch fails to boot: check AC power cord and wall power supply. Port no link: verify SFP/SFP+ transceiver, clean fiber connectors and check port admin status. Transceiver no DDM data: confirm Extreme validated transceiver. Stacking failure: verify same firmware version among stacked C5 switches. Over-temperature alarm: check chassis ventilation and dust removal.

Product BriefC5K17524 is Extreme Networks legacy C5 series 24-port SFP gigabit stackable Layer3 managed switch with 2×shared SFP+ 10G uplink slots, classic spare part for legacy enterprise fiber wiring closet network overhaul.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.