Extreme Networks SSR-GLX39-02 Gigabit LX I/O Line Card

Technical SpecificationsModel:SSR-GLX39-02 Brand:Extreme Networks Product Type:Hot-swappable I/O line card / blade Compatible chassis:X-Pedition 8000 / 8600 modular chassis router Ports:2 × SC 1000BASE-LX single-mode fiber ports Speed:Wire-speed 1G per port Fiber type:Single-mode fiber, SC connector Minimum OS:EOS (Enterasys Operating System) Operating temperature:0℃ ~ +40℃ Storage temperature:-40℃ ~ +70℃ Relative humidity:10%~90%, non-condensing Weight:1.3 kg

System compatibilitySSR-GLX39-02 belongs to Extreme Networks X-Pedition 8000/8600 chassis router family, formerly Enterasys. It can be installed in the slots of X-Pedition 8000 and 8600 chassis. Designed for long-distance gigabit fiber interconnection in enterprise core and aggregation networks. Widely used for legacy core network spare replacement.

FunctionSSR-GLX39-02 provides 1000BASE-LX single-mode fiber interfaces for X-Pedition chassis routers. It supports Layer3 routing, ACL, QoS, multicast policy control and wire-speed packet forwarding. It monitors port optical signal parameters, link status, module temperature and power consumption, and reports hardware health information to the chassis supervisor engine. Used for long-distance gigabit fiber interconnection between core routers and aggregation switches.

InstallationHot-swappable replacement. Insert SSR-GLX39-02 into empty module slot of X-Pedition 8000/8600 chassis. Tighten captive screws. Connect single-mode fiber patch cords to SC ports. Verify module recognition and port status on EOS before putting into production.

Interface2×SC 1000BASE-LX single-mode fiber ports,module status LEDs,ejector latches for Extreme Networks SSR-GLX39-02.

FeatureOriginal Extreme Networks X-Pedition series hot-swappable 2-port 1G LX fiber line card, single-mode SC interface for long-haul fiber transmission, real-time optical health monitoring,EOS operating system,built-in self-diagnostic function. This spare supports legacy enterprise core and aggregation layer long-distance fiber network deployment.

DiagnosticModule not detected: check blade seating, captive screws and backplane contact. Fiber port link down: verify single-mode fiber cable, clean SC connectors and check port admin status. Optical low power alarm: inspect fiber cable breakage or dirty fiber end face. Over-temperature alarm: inspect chassis fan tray operation and airflow.

Product BriefSSR-GLX39-02 is Extreme Networks hot-swappable 2-port 1000BASE-LX single-mode fiber line card for X-Pedition 8000/8600 chassis routers,classic spare part for legacy enterprise core long-distance fiber interconnection overhaul.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.