SIEMENS MOORE CBR-3 Card Base Rack

Technical SpecificationsModel:CBR-3 Brand:SIEMENS MOORE Product Type:3-Slot Card Base Rack / Chassis System:APACS+ DCS System Power Supply:24V DC Mounting:Panel / cabinet rack mount Operating temperature:-20℃ ~ +70℃ Storage temperature:-40℃ ~ +85℃ Relative humidity:5%~95%, non-condensing Weight:2.9kg Dimension:210mm320mm110mm

System compatibilityCBR-3 is compatible with SIEMENS MOORE APACS+ distributed control system. It supports up to 3 APACS+ rack modules including controller, communication and I/O modules.

FunctionThis 3-slot base rack provides mechanical mounting and backplane bus connection for APACS+ series modules. It distributes 24V DC power and backplane communication signals among all installed modules, forming a small local control node for process automation.

InstallationCut off system power before installation. Secure the rack chassis inside control cabinet. Install modules into slots, lock front latches, wire 24V DC power supply to rack terminals. Configure module address after power on.

InterfaceInternal backplane bus, 24V DC power terminal block, module slots, front status LED indicators for rack power.

FeatureCompact 3-slot design, integrated backplane bus, reliable power distribution, convenient module hot swap support, robust metal chassis for industrial environment. Obsolete legacy spare part, used for APACS+ DCS small control station maintenance and replacement.

DiagnosticRack no power: check 24V DC power input and terminal wiring. Module communication failure: inspect backplane connector contact and module seating. Overheating alarm: verify cabinet ventilation and ambient temperature.

Product BriefSIEMENS MOORE CBR-3 is APACS+ series 3-slot card base rack, used to install APACS+ controller and I/O modules to build compact DCS control nodes in petrochemical, power and pulp & paper plants.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time 3-7 working days. It is only used for equipment maintenance and retrofit.