Maxon GG433-2030-9 Gas Burner Unit

Module Feature

GG433-2030-9 is Maxon multi‑orifice straight flame industrial gas burner. It adopts integrated gas distribution manifold and multi‑hole flame tip design to mix fuel gas and combustion air evenly.

Anti‑backfire structure improves operation safety. It supports wide turndown adjustment to match variable heat load demand. Commonly matched with flame scanner, ignition device and safety shutoff valve, widely used for heating furnace, drying oven and thermal oxidation equipment.

Working principle

Combustion air and fuel gas are separately delivered to the mixing section of burner. The mixed gas flows through precision orifices and is ignited to form stable straight flame.

Upstream control valves adjust gas‑air ratio to change heat output. Flame detector continuously monitors flame status, and triggers safety shutdown interlock once flame loss occurs.

Onboard components

Heat resistant alloy burner head, gas distribution manifold, multi‑orifice flame tip, air inlet flange, gas inlet port, ignition mounting port, flame sighting port, mounting flange.

LED indicators

No built‑in indicator lamp. Flame alarm status is displayed on matched flame safety controller cabinet.

Hardware self‑diagnosis

The burner itself has no electronic diagnosis; safety diagnosis is realized by external flame amplifier, pressure switch and safety valve loop.

Programming software

Not applicable.

Electrical & Process Parameters

Model:GG433-2030-9 Brand:Maxon Device type:Straight Flame Gas Burner Fuel:Natural gas Flame type:Straight flame Function:Controlled gas combustion and heat release for industrial thermal process equipment

Mechanical & Structure

Mounting:Flange mounting on furnace refractory wall Protection class:IP40 Housing:Heat resistant alloy burner assembly

Environmental

Operating temperature:Flame zone up to +1093℃ Storage temperature:-40℃ ~ +85℃ Ambient humidity:5~95% non‑condensing Certification:UL, CE combustion industry standard compliant Status:Maxon original combustion spare

Installation

Install the burner to furnace refractory flange with sealing gasket. Connect gas pipeline and combustion air duct according to flow direction.

Install ignition electrode and flame sensor. Complete air purging, gas leakage test and ignition test before commissioning. Regularly clean burner tip to prevent orifice blockage.

Interface

Gas inlet flange, combustion air inlet flange, ignition port, flame sight port.

Diagnostic

Ignition failure: Gas supply cut off, air‑gas ratio imbalance, ignition electrode fouled.

Flame blow out: Orifice blocked, furnace pressure fluctuation or improper air ratio.

Backfire: Burner tip damaged, mixture flow velocity too low.

Product Brief

Maxon GG433-2030-9 straight flame gas burner, natural gas firing, alloy anti-backfire burner head, used for industrial furnace, drying oven and thermal oxidation combustion system.