KEBA OP341/Y-1400 Operator Panel

Technical Specifications

Model:OP341/Y-1400

Brand:KEBA

Product type:Industrial HMI operator panel

Power supply:24 Vdc,19.2~28.8V tolerance,max 1.0A

Control function:Machine parameter display,manual operation,recipe modification,alarm message display,data monitoring,hardware self-diagnosis,fault indication

Communication:Kemro K2 backplane bus

Mounting:Panel cutout installation

Operating temperature:-10~55℃

Storage temperature:-20~70℃

Relative humidity:5~95% non-condensing

Max working altitude:2000m

Weight:1.1kg

Dimension:320mm240mm60mm

Certification:CE

Protection class:Front IP65,back IP20

System compatibility

OP341/Y-1400 belongs to KEBA Kemro K2 control system family,matched with KEMRO-BUS-8 backplane,CP033/Y CPU and I/O modules.Widely applied in injection molding,die-casting machine control cabinets.This is a discontinued legacy HMI panel for equipment maintenance spare replacement.

Function

OP341/Y-1400 serves as KEBA machine operator panel.It realizes human-machine interaction for injection molding equipment,displays real-time machine running status,modifies process recipe and parameters,shows system alarm information.It sends manual operation commands to the CPU controller via backplane bus.It acts as human-machine interface component for Kemro K2 modular control system.

Installation

Install OP341/Y-1400 into cabinet cutout and fasten fixing clips.Complete 24V power and communication wiring according to wiring drawing.Check power polarity and communication connection before power-on.

Interface

‑24Vdc power input terminal

‑Kemro K2 backplane communication connector

‑Function keys and display screen

‑Status and fault LED indicator

Circuit feature

Built-in ESD and surge suppression circuit,signal isolation design,strong anti-interference performance for industrial cabinet environment.

Feature

OP341/Y-1400 is obsolete KEBA series spare part.Typical failures include screen no display,key malfunction,communication loss,connector oxidation.Check display screen,keypad and communication port before replacement.This panel must match Kemro K2 series rack system,direct substitution without inspection is not recommended.

Diagnostic

When communication interruption,power abnormality or internal hardware fault occurs,the module triggers protection and lights up fault LED.

Built‑in function:Real-time data monitoring,parameter setting,recipe management,alarm display,manual operation,backplane communication,self-diagnosis and fault alarm,used as KEBA Kemro K2 series HMI operator panel spare replacement.

Product Brief

OP341/Y-1400 is KEBA old industrial HMI operator panel for injection molding and die-casting machine automation equipment.Confirm compatibility with Kemro K2 CPU before ordering.ESD protection required during handling and installation.