Fireye R9105P5002 Flame Monitor Rack Controller

Technical Specifications

Model：R9105P5002 Brand：Fireye Product Type: Rack mounted flame monitor controller from R9000 series

Detection Feature:

• Compatible flame scanner: C9501, C9502, C9507 series UV flame scanners

• FFRT (Flame Failure Response Time): Jumper selectable timing

• Supply voltage selection: Configurable via internal jumper

• Flame threshold: Adjustable flame signal sensitivity

• Flame failure action: De-energize safety relay immediately once valid flame signal is lost

Electrical Parameters:

• Rated load: 3A relay contact rating

• Relay output: Flame presence relay and alarm relay

• Signal input: Raw UV flame signal input from C95xx scanners

• Terminal: Screw terminal block for scanner and interlock wiring

Mechanical & Structure:

• Housing: Standard 19-inch rack mount chassis

• Mounting: 19" equipment rack installation

• Indicator: Analog flame meter and multi-status LED indicators

• Adjustment knobs: Onboard potentiometer for flame sensitivity tuning

Environmental:

• Operating temperature: -20℃ ~ +60℃

• Ambient humidity:0~85% non-condensing

• Certification: UL, FM approved

• Weight: Approx 1.6kg

System compatibilityR9105P5002 belongs to Fireye R9000 flame monitor family. Matched with C9501, C9502, C9507 ultraviolet flame scanners. Suitable for gas, oil and dual-fuel industrial burners, large boilers and process heating furnaces. Widely used for combustion safety system spare replacement.

FunctionR9105P5002 is rack-mounted flame monitor controller manufactured by Fireye. It receives raw UV flame signal from C95xx series flame scanners, amplifies and processes flame signal. Users can set supply voltage and FFRT through internal jumpers, and adjust flame sensitivity by potentiometer. It continuously monitors flame presence, cuts off safety relay and triggers alarm when flame loss is detected. Onboard analog meter displays real-time flame strength for on-site diagnosis. Widely deployed for large industrial boiler flame monitoring and spare replacement.

InstallationFollow lockout/tagout safety procedure before installation. Install R9105P5002 into standard 19-inch rack cabinet. Run shielded signal cable to connect controller and C95xx flame scanner strictly follow Fireye R9000 wiring manual. Configure jumper settings for voltage and FFRT, calibrate flame threshold, complete flame signal test during commissioning.

InterfaceOnboard analog flame meter,status LED indicators,flame signal input terminals,safety relay output terminals,adjustment potentiometers,19-inch rack chassis for Fireye R9105P5002.

FeatureOriginal Fireye R9105P5002 R9000 series rack mount flame controller,jumper configurable voltage and FFRT,support C9501/C9502/C9507 UV scanners,UL & FM safety certified. This spare unit is used for large industrial boiler burner flame signal processing maintenance and hardware replacement.

DiagnosticNo flame reading: Inspect scanner lens contamination, scanner wiring continuity and terminal connection. Marginal unstable flame signal: Tune flame sensitivity potentiometer,check scanner optical alignment. Relay no response: Verify jumper voltage configuration and power supply. Random flame loss alarm: Check cable shielding, furnace vibration and scanner overheating.

Product BriefR9105P5002 is Fireye R9000 rack mount flame monitor controller with jumper selectable voltage and FFRT,paired with C95xx UV scanners,classic spare for large industrial burner flame safety monitoring system.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and replacement.