XYCOM 9457 Industrial PC/AT Workstation

Technical Specifications

Model:9457

Brand:XYCOM

Product type:14 Inch SVGA CRT Modular Industrial Panel PC Workstation

Power supply:115/230VAC auto-switching,50/60Hz,200W

Display:14 inch SVGA color CRT display,with impact resistant protective shield

Processor:Intel Pentium / Celeron

Memory:Max 512MB DRAM

Storage:IDE hard disk,front 1.44MB floppy drive,optional solid state flash drive

Graphics:SVGA video controller

Communication:2*RS232 COM ports,10/100 BaseT Ethernet,LPT,PS/2

Expansion:7-slot passive backplane,2 PCI +5 ISA slots

Input:Programmable sealed membrane function keypad,optional resistive touchscreen

Weight:30.0lbs(13.6kg)

Mounting:Panel mount,optional remote separate installation for monitor and computer module

Operating temperature:0℃ ~ +55℃

Storage temperature:-40℃ ~ +85℃

Relative humidity:5%~95%,non-condensing

Front panel:NEMA4/4X/12,dust and splash proof

Certification:CE,UL,Class I Division2

System compatibility

9457 belongs to XYCOM 9400 series modular industrial panel PC workstation.

It can communicate with XYCOM VME bus SBC such as XYCOM 1840 and XVME series I/O modules.

Compatible with turbine,compressor and legacy DCS control systems via serial port or ethernet.

Commonly used for power plant,oil & gas,petrochemical old equipment monitoring,maintenance and spare replacement.

Function

Run MS-DOS,Windows95/98/NT/2000 operating system and XYCOM SoftScreen HMI monitoring software.

Real-time display process values,trend curves,bar charts and system alarm information.

Membrane keypad or optional touchscreen for parameter setting,mode switching and manual operation.

Modular split design,monitor module and computer module can be installed separately,up to 1.8m separation distance.

Hardware watchdog timer,guarantee stable continuous operation in harsh industrial environment.

Power-on self-test to detect CPU,memory,storage and peripheral hardware faults.

Support ISA/PCI board installation for data acquisition and communication function expansion.

Installation

Embed the unit into cabinet panel cutout and fasten brackets,or adopt remote split mounting kit.

Connect 115/230VAC power cable and protective earth wire.

Wire serial or ethernet cable to VME controller or DCS system.

Power on,enter BIOS to configure hardware parameters.

Install operating system and HMI project,test display,keypad,touch and communication function.

Interface

AC power terminal,COM1/COM2 RS232 port,10/100M RJ45 ethernet,LPT port,PS/2 port,front floppy drive,14 inch SVGA CRT display,membrane keypad/touchscreen,LED indicators:PWR,HDD,STATUS.

Feature

Split modular structure,monitor and host can be installed separately,flexible layout for cabinet space.

Sealed NEMA4/4X/12 front panel,dust and splash resistant for factory harsh environment.

7-slot passive backplane,rich ISA and PCI expansion capability for custom industrial boards.

14-inch SVGA CRT with anti-impact protective shield,optional touchscreen for direct screen operation.

Support multiple legacy Windows and DOS operating systems,compatible with old turbine monitoring software.

Discontinued legacy industrial workstation,supply only for old production system spare replacement.

Heavy-duty metal enclosure,shock and vibration resistant for long-time continuous operation.

Diagnostic

Check PWR and HDD LED;no boot:check memory,hard disk and power supply;communication abnormal:inspect serial/ethernet wiring and IP/baud rate;display fault:check CRT shield and video controller.

Product Brief

XYCOM 9457 is 9400 series 14-inch CRT split modular industrial panel PC workstation.

It serves as on-site monitoring host for legacy turbine and compressor control system,supports HMI operation and data communication,widely used as spare parts for petrochemical and power plant old DCS renovation.

Disclaimer

Product parameters are for reference only and shall not be used as pricing basis. Goods are in short supply and will be powered on for inspection before shipment. Overseas delivery lead time is 3-7 working days. The product is only used for equipment maintenance and transformation.