Honeywell 51197005200 Digital Output Module

Technical Specifications

Model:51197005200

Brand:Honeywell

Product type:FSC digital output module

System series:FSC Fail Safe Controller SIS

Bus type:Parallel backplane system bus

Compatible modules:FSC main controller,digital input boards,backplane assembly,redundant power supply

Redundancy:Supports DMR dual modular redundant / QMR quadruple modular redundant configuration

Power bus:5V DC,24V DC power supply

Operating temperature:0~+60℃

Relative humidity:5~95% non-condensing

Weight:4.33kg

Certification:CE,TÜV,SIL3

System compatibility

This digital output hardware belongs to Honeywell FSC safety instrumented system,mounted inside FSC rack cabinet. It receives safety logic instructions from main controller and transmits discrete control signals to field solenoid valves,contactors and other safety actuators. It works in coordination with Experion PKS DCS,widely deployed in oil & gas,petrochemical and chemical sites for ESD emergency shutdown and fire & gas protection.

Function

51197005200 acts as the safety control output unit of FSC SIS. It converts internal safety commands from controller into field discrete switch signals to trigger safety actions. Every output channel carries continuous circuit diagnosis,capable of detecting wire break,short circuit and actuator circuit fault in real time.

Installation

Insert the module vertically into designated backplane slot of FSC rack. Connect field actuator cables to terminal blocks,configure channel logic and fault detection parameters via Honeywell FSC engineering software.

Interface

‑Gold finger connector for backplane bus communication

‑Field wiring terminals for actuator connection

‑Internal signal driving traces

‑LED indicators for channel operating status and fault alarm

Circuit feature

Conformal coated multi-layer PCB design,with built-in signal driving circuit and surge suppression. Each channel has independent fault monitoring circuit,fully compliant with SIL3 functional safety hardware standards.

Feature

51197005200 is a spare digital output board within Honeywell FSC SIS product portfolio. Common defects include output channel burnout,gold finger corrosion and drive circuit abnormality. Confirm rack slot definition and firmware compatibility before replacement.

Diagnostic

When channel open circuit,short circuit or hardware failure is detected,the module will activate safety alarm and upload detailed fault diagnostic logs to safety workstation.

Built‑in function

Safety interlock control signal output and channel health diagnosis for FSC safety rack,used as SIS digital output spare replacement.

Product Brief

51197005200 is Honeywell FSC SIL3 digital output module,supporting DMR/QMR redundant architecture. Verify rack compatibility before ordering. ESD anti-static protection must be observed during handling and installation.