XYCOM 81945F VME Embedded CPU Module

Technical Specifications

Model:81945F

Brand:XYCOM

Product type:VMEbus Embedded Real-time CPU Control Board

Power supply:+5V VME backplane power

Bus interface:Standard VMEbus,support VME master/slave communication

Form factor:Single-height VME card

Weight:0.25kg

Operating temperature:0℃ ~ +50℃

Storage temperature:-40℃ ~ +85℃

Relative humidity:5%~95%,non-condensing

Certification:CE,UL

System compatibility

81945F belongs to XYCOM legacy VME control board series.

It installs in VME chassis and cooperates with XVME series I/O modules.

Compatible with turbine,compressor and legacy DCS control systems via VME bus.

Commonly used for power plant,oil & gas,petrochemical old equipment maintenance and spare replacement.

Function

Serve as local embedded controller for VME rack,run real-time industrial control logic.

Integrated digital and analog I/O,complete field signal acquisition and output control.

High speed signal processing,real-time response for critical process control tasks.

Communicate with VME main CPU through backplane for data exchange and command interaction.

Onboard self-test for CPU core,I/O channels and VME bus interface fault inspection.

Installation

Power off VME chassis.

Insert 81945F card into empty VME slot,tighten front panel fixing screw.

Connect field sensor and actuator wiring to front terminal connector.

Power on chassis,run hardware self-test.

VME CPU scans bus,identifies the board and starts control operation.

Interface

VME P1 backplane connector,front I/O terminal connector,LED indicators:PASS,FAULT,RUN.

Feature

Single height VME embedded control board,integrated CPU plus mixed I/O design.

Industrial grade components,anti-vibration and anti-electromagnetic interference.

Real-time control architecture,suitable for turbine and process critical control loop.

VME master/slave dual mode,flexible configuration in VME system.

Discontinued obsolete VME control module,supply only for old production system spare replacement.

Vibration resistant PCB design,suitable for turbine control cabinet.

Diagnostic

FAULT LED on:CPU core failure or I/O channel damage;

Cannot be identified by CPU:check VME backplane contact and address jumper setting;

I/O signal abnormal:check field wiring,load condition and channel configuration.

Product Brief

XYCOM 81945F is legacy VMEbus embedded real-time CPU control board.

It implements local signal acquisition and real-time control for VME control rack,widely used as spare part for turbine and compressor control,petrochemical and power plant old DCS renovation.

Disclaimer

Product parameters are for reference only and shall not be used as pricing basis. Goods are in short supply and will be powered on for inspection before shipment. Overseas delivery lead time is 3-7 working days. The product is only used for equipment maintenance and transformation.