BAUMULLER 46038 Servo Drive Control Printed Circuit Board 

Technical Specifications

Model: 46038 Brand: BAUMULLER (Baumüller, Germany) Product Type: Servo Drive Internal Control Printed Circuit Board Mounting: Installed inside BAUMULLER servo drive housing Operating temperature: 0℃ ~ +60℃ Storage temperature: -20℃ ~ +70℃ Relative humidity: 5%~95%, non-condensing Weight: 0.30kg Dimension: 210mm140mm18mm Protection: IP20 (when assembled inside drive enclosure)

System compatibility

46038 belongs to BAUMULLER legacy servo drive series PCB. Compatible with corresponding BAUMULLER drive power unit and control assembly. It serves as internal signal and power distribution board for the drive. Suitable for maintenance and replacement of old BAUMULLER drive systems in printing machinery, plastic extrusion, textile and metal forming equipment.

Function

46038 servo drive internal printed circuit board. It handles power distribution and control signal routing inside BAUMULLER servo drive. It transmits feedback signals from resolver/encoder and sends command signals to power stage. Built-in signal filtering and protection fuse circuits. It is the core hardware for signal interconnection within the drive unit. Widely used for overhaul of legacy BAUMULLER servo drive systems.

Installation

Cut off drive main power before installation. Open servo drive enclosure, disconnect old PCB connectors. Install 46038 board, align pin connectors and secure mounting screws. Reconnect power, encoder and power stage wiring. Verify power rail voltage and signal transmission before formal operation.

Interface

Internal power connector, encoder feedback connector, power stage signal terminals, test signal points for 46038 BAUMULLER PCB.

Feature

BAUMULLER 46038 dedicated drive control PCB, internal power distribution, encoder signal routing, hardware EMC filtering, compact built-in drive design, industrial anti-interference design. This discontinued legacy industrial spare part used for old BAUMULLER servo drive hardware maintenance and replacement.

Diagnostic

Drive no power after replacement: check PCB fuses and power connector contact for 46038. No motor feedback: inspect encoder signal traces and connector pins. Intermittent drive fault: check soldering joints and component aging. Drive cannot output torque: verify command signal transmission on PCB.

Product Brief

46038 is German BAUMULLER servo drive internal printed circuit board. It manages power distribution and encoder/control signal routing inside BAUMULLER drive unit, classic spare part for legacy BAUMULLER servo drive overhaul.

Disclaimer: All parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.